Product

Optical Fiber checker is made with laser technology. The universal connector is installed with a fine ceramic sleeve for good alignment and to minimize scratches on the ferrule of the optical fiber cable. It has a button on the barrel for CW/PULSE/OFF functions. The users can tell the fault of the optical fiber cable easily with 650nm wavelength laser beam.

• Easy to check fiber fault section with red laser

• Function switch supplies both CW and pulse mode for extra clear noticeable results

• Portable pen style design

• Strong protective cap for falling protection

• Low operation current

• Standard 2xAAA battery apply

Model No.: FC-2010

Laser class: Class 3R

Wavelength: 650nm@25ºC

Spectral width: <20nm

Output power: >–4dBm (0.398mw)@25ºC into 9um fiber

Mode: CW/3Hz Pulse

Battery : AAA 1.5V x 2

Output power reliable: ≥-3dBm ±0.50dB/8hr@650nm

Range: Visibility to 3km

Operating temp.: 0ºC to 50ºC

Storage temp.: 0ºC to 70ºC

Fiber Checker, VFL with 2.5mm & 1.25mm Interface
Visual Fault Locator (Pen Style)

Fiber Checker, VFL with 2.5mm & 1.25mm Interface – Visual Fault Locator (Pen Style) is made with laser technology. The universal connector is installed with a fine ceramic sleeve for good alignment and to minimize scratches on the ferrule of the optical fiber cable. It has a button on the barrel for CW/PULSE/OFF functions. The users can tell the fault of the optical fiber cable easily with 650nm wavelength laser beam.